Getting Started

Last updated: 24 Sep 2026

1. Unpack the machine and carefully set it on a flat, sturdy table.

2. Remove the lid, boxes of accessories, and goodies from inside the machine.

3. Remove the brass lock-down bolts shown below.

4. Cut the zip tie shown below, being careful not to damage the FPC.

5. Remove the brass lock-down bolt shown below.

6. Use the included snap-in rivets to install the lid onto the machine.

7. Place the recycling bin inside the machine.

8. Insert the set of nozzles into the tool changer, sorting these left to right from smallest to largest diameter.

9. Plug in the included power supplies and your monitor’s HDMI cable. Plug in your keyboard and mouse via USB.

10. Turn on the computer and machine switches.